Cardiac function monitoring during marathon training based on smart medical wearable sensor device
Abstract
In recent years, intelligent wearable sensor devices have developed rapidly and can be seen everywhere in daily life. With the rapid development of electronic components and the continuous improvement of their performance, intelligent wearable intelligent products have gradually become possible and have shown explosive growth. In addition, intelligent wearable electronic devices have many advantages that traditional devices do not have. With the popularity of fitness wearable devices, intelligent wearable devices can also be used for real-time heart rate and dynamic electrocardiogram (ECG) monitoring during marathon sports. It can effectively prevent sudden death. During marathon training and other health services, it is very important to use intelligent wearable sensor devices to monitor heart function. This paper puts forward a heart function monitoring system for marathon training based on intelligent wearable sensor, expounds the origin of marathon sports and the importance of heart function monitoring for marathon athletes during training. This paper discusses the technology and construction method of heart rate monitoring system based on intelligent wearable sensor device. At the same time, relevant experiments are carried out to verify the relevant performance of the intelligent wearable sensor device in the algorithm. The results show that the R wave detection accuracy of wearable devices based on traditional algorithms is usually between 92% and 93%. The R wave detection accuracy of the intelligent wearable sensor device improved by the algorithm in this paper has been improved to more than 97%, and the R wave detection accuracy of the algorithm in this paper is much higher than that of the traditional algorithm. This also reflects the effectiveness of the intelligent wearable sensor device of the algorithm during the training of marathon athletes.
References
1. Khamitkar, Sahana S., and Mohammed Rafi. “IoT based System for Heart Rate Monitoring.” International Journal of Engineering Research & Technology 9.07 (2020): 1563-1571.
2. Chen, Hongbin. “A two-stage amplified PZT sensor for monitoring lung and heart sounds in discharged pneumonia patients.” Microsystems & nanoengineering 7.1 (2021): 1-11.
3. Mercuri, Marco. “A direct phase-tracking Doppler radar using wavelet independent component analysis for non-contact respiratory and heart rate monitoring.” IEEE transactions on biomedical circuits and systems 12.3 (2018): 632-643.
4. Gillinov, Stephen. “Variable accuracy of wearable heart rate monitors during aerobic exercise.” Med Sci Sports Exerc 49.8 (2017): 1697-1703.
5. Hernando, David. “Validation of heart rate monitor Polar RS800 for heart rate variability analysis during exercise.” The Journal of Strength & Conditioning Research 32.3 (2018): 716-725.
6. He, Wenwen. “Robust heart rate monitoring for quasi-periodic motions by wrist-type PPG signals.” IEEE journal of biomedical and health informatics 24.3 (2019): 636-648.
7. Georgiou, Konstantinos. “Can wearable devices accurately measure heart rate variability? A systematic review.” Folia medica 60.1 (2018): 7-20.
8. Siegel, Arthur J., and Timothy D. Noakes. “Can pre-race aspirin prevent sudden cardiac death during marathons?.” British Journal of Sports Medicine 51.22 (2017): 1579-1581.
9. Vora, Amit. “Prevention of sudden cardiac death in athletes, sportspersons and marathoners in India.” Indian heart journal 70.1 (2018): 137-145.
10. Ohashi, Koichi. “Cardiac Arrest in a 33-year-old Marathon Runner with Anomalous Right Coronary Artery Originating from the Pulmonary Artery.” Internal Medicine 61.5 (2022): 673-677.
11. Bayoumy, Karim. “Smart wearable devices in cardiovascular care: where we are and how to move forward.” Nature Reviews Cardiology 18.8 (2021): 581-599.
12. Chen, Zhen. “Multifunctional conductive hydrogels and their applications as smart wearable devices.” Journal of Materials Chemistry B 9.11 (2021): 2561-2583.
13. Chang, Ye. “State-of-the-art and recent developments in micro/nanoscale pressure sensors for smart wearable devices and health monitoring systems.” Nanotechnology and Precision Engineering 3.1 (2020): 43-52.
14. Adapa, Apurva. “Factors influencing the adoption of smart wearable devices.” International Journal of Human–Computer Interaction 34.5 (2018): 399-409.
15. Gu, Z., Xiong, H., & Hu, W. “Empirical Comparative Study of Wearable Service Trust Based on User Clustering.” Journal of Organizational and End User Computing, 33.6 (2021): 1-16.
16. Xiyue Cao, Yanmei Guo, Mu Zhao, JieLi, ChonglinWang, Jianfei Xia, Tingting Zou, ZonghuaWang. “An efficient multi-enzyme cascade platform based on mesoporous metal-organic frameworks for the detection of organophosphorus and glucose.” Food Chemistry 381 (2022): 132282.
17. Hanbiba Sadia. “Water Environment Monitoring System Based on Wireless Sensor Network.” Academic Journal of Environmental Biology 2.1 (2021): 39-47.
18. Shabaan, Muhammad. “Survey: smartphone-based assessment of cardiovascular diseases using ECG and PPG analysis.” BMC medical informatics and decision making 20.1 (2020): 1-16.
19. Chandrasekhar, Anand. “PPG sensor contact pressure should be taken into account for cuff-less blood pressure measurement.” IEEE Transactions on Biomedical Engineering 67.11 (2020): 3134-3140.
20. Panwar, Madhuri. “PP-Net: A deep learning framework for PPG-based blood pressure and heart rate estimation.” IEEE Sensors Journal 20.17 (2020): 10000-10011.
21. Dall’Olio, Lorenzo. “Prediction of vascular aging based on smartphone acquired PPG signals.” Scientific reports 10.1 (2020): 1-10.
22. Chu Junkun, Zhao Qian, and Yang Yining. “The development and application progress of wearable ECG devices in cardiovascular diseases.” Chinese Journal of Medical Devices 38.12 (2023): 158-164.
Copyright (c) 2024 Hongjuan Cai, Miao Cai
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright on all articles published in this journal is retained by the author(s), while the author(s) grant the publisher as the original publisher to publish the article.
Articles published in this journal are licensed under a Creative Commons Attribution 4.0 International, which means they can be shared, adapted and distributed provided that the original published version is cited.
Submit a Paper
