Study on noise reduction and structural optimization of ventilated bio-metamaterial plates for acoustic applications

  • Ran Ran Department of Civil Engineering, City University of Wuhan, Wuhan 430083, China
Keywords: bio-acoustic environments; structural stability; sound transmission loss; airflow rates; von mises stress; structural stress
Article ID: 581

Abstract

This study focuses on the noise reduction performance and structural optimization of ventilated metamaterial plates designed for bio-acoustic applications, where effective sound attenuation and ventilation are both crucial. Traditional soundproofing materials, which rely on mass and thickness, are inadequate for bio-acoustic environments that require lightweight and compact solutions. In contrast, bio-acoustic metamaterials use resonance effects to attenuate sound while maintaining necessary airflow selectively. This research evaluates multiple metamaterial plate configurations through computational simulations and experimental testing, examining their performance in terms of Sound Transmission Loss (STL), airflow rates, and von Mises stress. The results reveal that Plate Configuration 1 offers the highest STL at 39.14 dB but at the cost of lower airflow efficiency (0.69 m3/s) and increased structural stress (24.83 MPa). Plate Configuration 2 achieves the best airflow efficiency (0.82 m3/s) but with lower noise reduction (STL of 35.42 dB). Plate Configuration 3 provides a balanced performance, with moderate noise attenuation (STL of 37.89 dB), good airflow (0.75 m3/s), and structural stability (von Mises stress of 22.12 MPa). The study concludes that bio-acoustic metamaterials can be effectively optimized for different bio-acoustic applications by carefully tuning their geometry, making them suitable for eco-acoustics, wildlife monitoring, and medical devices where noise control and airflow are critical.

References

1. Gao, N., Zhang, Z., Deng, J., Guo, X., Cheng, B., & Hou, H. Acoustic metamaterials for noise reduction: a review. Advanced Materials Technologies. 2022, 7(6), 2100698.

2. Liao, G., Luan, C., Wang, Z., Liu, J., Yao, X., & Fu, J. Acoustic metamaterials: A review of theories, structures, fabrication approaches, and applications. Advanced Materials Technologies.2021, 6(5), 2000787.

3. Ji, G., & Huber, J. (2022). Recent progress in acoustic metamaterials and active piezoelectric acoustic metamaterials-a review. Applied Materials Today, 26, 101260.

4. Murugaiya, R., Gamage, M. M. M., Murugiah, K., & Perumal, M. Acoustic-Based Applications for Vertebrate Vocalization. Springer Nature. 2021.

5. Oswald, J. N., Erbe, C., Gannon, W. L., Madhusudhana, S., & Thomas, J. A. Detection and classification methods for animal sounds. Exploring animal behavior through sound. 2021, 1, 269-317.

6. Guex, A. G., Di Marzio, N., Eglin, D., Alini, M., & Serra, T. The waves that make the pattern: a review on acoustic manipulation in biomedical research. Materials Today Bio. 2021, 10, 100110.

7. Moges, K. A., Dalila, N., Plaskota, P., & Pyo, S. Evaluation Methods, Testing Standards, and Simulation Techniques of Sound Absorption Capabilities of Cementitious Materials: A Review. Journal of Building Engineering. 2024, 110468.

8. Indumathi Nallathambi, Padmaja Savaram, Sudhakar Sengan*, Meshal Alharbi, Samah Alshathri, Mohit Bajaj, Moustafa H. Aly and Walid El-Shafai, Impact of Fireworks Industry Safety Measures and Prevention Management System on Human Error Mitigation Using a Machine Learning Approach, Sensors, 2023, 23 (9), 4365; DOI:10.3390/s23094365.

9. Parkavi Krishnamoorthy, N. Satheesh, D. Sudha, Sudhakar Sengan, Meshal Alharbi, Denis A. Pustokhin, Irina V. Pustokhina, Roy Setiawan, Effective Scheduling of Multi-Load Automated Guided Vehicle in Spinning Mill: A Case Study, IEEE Access, 2023, DOI:10.1109/ACCESS.2023.3236843.

10. Ran Qian, Sudhakar Sengan, Sapna Juneja, English language teaching based on big data analytics in augmentative and alternative communication system, Springer-International Journal of Speech Technology, 2022, DOI:10.1007/s10772-022-09960-1.

11. Ngangbam Phalguni Singh, Shruti Suman, Thandaiah Prabu Ramachandran, Tripti Sharma, Selvakumar Raja, Rajasekar Rangasamy, Manikandan Parasuraman, Sudhakar Sengan, “Investigation on characteristics of Monte Carlo model of single electron transistor using Orthodox Theory”, Elsevier, Sustainable Energy Technologies and Assessments, Vol. 48, 2021, 101601, DOI:10.1016/j.seta.2021.101601.

12. Huidan Huang, Xiaosu Wang, Sudhakar Sengan, Thota Chandu, Emotional intelligence for board capital on technological innovation performance of high-tech enterprises, Elsevier, Aggression and Violent Behavior, 2021, 101633, DOI:10.1016/j.avb.2021.101633.

13. Sudhakar Sengan, Kailash Kumar, V. Subramaniyaswamy, Logesh Ravi, Cost-effective and efficient 3D human model creation and re-identification application for human digital twins, Multimedia Tools and Applications, DOI:10.1007/s11042-021-10842-y.

14. Prabhakaran Narayanan, Sudhakar Sengan*, Balasubramaniam Pudhupalayam Marimuthu, Ranjith Kumar Paulra, Novel Collision Detection and Avoidance System for Mid-vehicle Using Offset-Based Curvilinear Motion. Wireless Personal Communication 2021, 2021. DOI:10.1007/s11277-021-08333-2.

15. Balajee Alphonse, Venkatesan Rajagopal, Sudhakar Sengan, Kousalya Kittusamy, Amudha Kandasamy, Rajendiran Periyasamy Modeling and multi-class classification of vibroarthographic signals via time domain curvilinear divergence random forest, J Ambient Intell Human Comput, 2021, DOI:10.1007/s12652-020-02869-0.

16. Omnia Saidani Neffati, Roy Setiawan, P Jayanthi, S Vanithamani, D K Sharma, R Regin, Devi Mani, Sudhakar Sengan*, An educational tool for enhanced mobile e-Learning for technical higher education using mobile devices for augmented reality, Microprocessors and Microsystems, Vol. 83, 2021, 104030, DOI:10.1016/j.micpro.2021.104030 .

17. Firas Tayseer Ayasrah, Nabeel S. Alsharafa, Sivaprakash S, Srinivasarao B, Sudhakar Sengan and Kumaran N, “Strategizing Low-Carbon Urban Planning through Environmental Impact Assessment by Artificial Intelligence-Driven Carbon Foot Print Forecasting”, Journal of Machine and Computing, Vol. 4, No. 04, 2024, doi: 10.53759/7669/jmc202404105.

18. Shaymaa Hussein Nowfal, Vijaya Bhaskar Sadu, Sudhakar Sengan*, Rajeshkumar G, Anjaneyulu Naik R, Sreekanth K, Genetic Algorithms for Optimized Selection of Biodegradable Polymers in Sustainable Manufacturing Processes, Journal of Machine and Computing, Vol. 4, No. 3, PP. 563-574, https://doi.org/10.53759/7669/jmc202404054.

19. Hayder M. A. Ghanimi, Sudhakar Sengan*, Vijaya Bhaskar Sadu, Parvinder Kaur, Manju Kaushik, Roobaea Alroobaea, Abdullah M. Baqasah, Majed Alsafyani & Pankaj Dadheech, An open-source MP + CNN + BiLSTM model-based hybrid model for recognizing sign language on smartphones. Int J Syst Assur Eng Manag (2024). https://doi.org/10.1007/s13198-024-02376-x

20. K. Bhavana Raj, Julian L. Webber, Divyapushpalakshmi Marimuthu, Abolfazl Mehbodniya, D. Stalin David, Rajasekar Rangasamy, Sudhakar Sengan, Equipment Planning for an Automated Production Line Using a Cloud System, Innovations in Computer Science and Engineering. ICICSE Lecture Notes in Networks and Systems, vol 565, pp 707–717, Springer, Singapore. DOI:10.1007/978-981-19-7455-7_57.

21. Zhang 2022, C., Li, H., Gong, J., Chen, J., Li, Z., Li, Q., ... & Zhang, J. (2023). The review of fiber-based sound-absorbing structures. Textile Research Journal, 93(1-2), 434-449.

22. Zhu, S., Cheng, D., & Tang, X. (2024). Recent advances on the fabrication and application of sound absorption coating-based textile composites. Textile Research Journal, 00405175241231827.

23. Gonçalves, F. S. S. R. (2022). Acoustic ecology in artistic creation: re-discovering underwater soundscapes (Doctoral dissertation, Universidade do Porto (Portugal)).

24. Wang, X., Xu, S., Bai, Y., Luo, X., Yang, M., & Huang, Z. (2024). Meta-barriers for ventilated sound reduction via transformation acoustics. International Journal of Mechanical Sciences, 274, 109262.

25. Shao, C., Xiong, W., Long, H., Tao, J., Cheng, Y., & Liu, X. (2021). Ultra-sparse metamaterials absorber for broadband low-frequency sound with free ventilation. The Journal of the Acoustical Society of America, 150(2), 1044-1056.

26. Ruan, H., & Li, D. Band gap characteristics of bionic acoustic metamaterials based on spider web: engineering Structures. 2024, 308, 118003.

27. Aydın, G., & San, S. E. Breaking the limits of acoustic science: A review of acoustic metamaterials. Materials Science and Engineering: B. 2024, 305, 117384.

28. Qin, X., Yang, W., Zhang, Z., & Chen, Z. Research on the design and noise reduction performance of periodic noise barriers based on nested structure. Journal of Cleaner Production. 2024, 143708.

29. Xiang, L., Wang, G., Zhu, C., Shi, M., Hu, J., & Luo, G. Ventilation barrier with space-coiling channels of varying cross-sections for broadband sound insulation. Applied Acoustics. 2022, 201, 109110.

30. Nakayama, M. Acoustic metamaterials based on polymer sheets: from material design to applications as sound insulators and vibration dampers. Polym J 56, 71–77 (2024). https://doi.org/10.1038/s41428-023-00842-0

Published
2024-11-20
How to Cite
Ran, R. (2024). Study on noise reduction and structural optimization of ventilated bio-metamaterial plates for acoustic applications. Molecular & Cellular Biomechanics, 21(3), 581. https://doi.org/10.62617/mcb581
Section
Article